Have Questions?
Get the correct part
We know our products
We install what we sell!
Fast shipping on instock items
When designing the JT rear fender liners we had a few goals in mind. Our number one and two go hand in hand, complete coverage and maintain as large a wheel well opening as possible. We have also noticed over time that many customers want the ability to install our liners with factory flares so making sure that aesthetically the liners pair with factory flares along with our aftermarket flares was essential to the success of the product.
In order to give complete coverage we needed to find a new home for two wiring harnesses along with their connectors. We did this by designing a simple bracket that allows you to move the harnesses from outside the frame to safely tucked between the frame and the body out of harm's way. Now that everything that could be moved easily was in it’s new home we turned our attention to maximizing the wheel well opening. We followed the body with as tight of a clearance as possible while maintaining safe distance from all electrical components. Should your tire come into contact with the liner we wanted to provide a cushion so that electrical components would be protected. With the tight clearance we need to make sure to alleviate the chance of rattles so we use a combination of nutserts and through bolts to attach the liner securely to the wheel well. As with many Nemesis products we use factory holes to align the liner so that there is no doubt you are installing it in the correct position.
As our products have evolved for the Wrangler we have adjusted our focus from pure function to aesthetics and function. This liner was developed to work seamlessly with factory flares along with the Nemesis flares. We were able to maintain an independence between the two parts so that strength and install would not not be affected by the flares you choose to run with our liners.
By examining the needs of the market early in the development process we have developed a liner that offers the ultimate in clearance and coverage while allowing the customer to choose what flares to pair with our liners.
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. After 30 days we do not accept returns. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
