Why is a Spiderwebshade a perfect addition to Your Jeep?
When you’re out on the trails or cruising the open road with the top off, there’s nothing like that Jeep freedom — but sometimes the sun, wind, and debris can cut the adventure short. That’s where SPIDERWEBSHADE comes in.
Designed for Jeep owners who want to enjoy topless driving without the harsh UV rays, SPIDERWEBSHADE products are a must-have upgrade. Whether you own a Wrangler JK, JL, TJ, or a Gladiator, these mesh tops provide a perfect balance of sun protection, style, and durability.
Built for Jeep Life
SPIDERWEBSHADE tops are made from heavy-duty TrailMesh — a proprietary material designed to block up to 90% of the sun’s harmful rays while maintaining full visibility and airflow. It’s rugged enough for trail days and sleek enough for everyday driving.
Plus, installation is fast and tool-free. Using bungee balls and integrated grommets, most shades go on in under 15 minutes and stay in place year-round, even with your soft top or hard top on over it.
Why JeepHut Customers Love It:
- Reduces heat and sun exposure on long rides
- Installs easily without tools or modifications
- Looks awesome with dozens of colors and logo options
- Works with soft tops and hard tops without removing the shade
- Proudly made in the USA
Shop SPIDERWEBSHADE at JeepHut
Ready to shade up and ride out? Browse our full collection of SPIDERWEBSHADE tops here and find the perfect fit for your Jeep.
SPIDERWEBSHADE FAQS
Why is there an unused front-middle grommet on my JK SPIDERWEBSHADE?
This unused grommet on our JK SPIDERWEBSHADE Shade Tops is included as a convenience to JK owners. In 2009, Jeep shifted the placement of the front-middle footmans loop to the left roughly 1.5″. Our JK SPIDERWEBSHADE Shade Tops feature two front-middle footmans loop grommets so that the top can be installed on any JK – both pre-2009 and post-2009. If your JK is a 2007 or 2008 model, install your SPIDERWEBSHADE using the grommet directly in the front center of the top. If your JK is a 2009 or later model, install your SPIDERWEBSHADE using the grommet closer to the driver’s side.
Which top would best fit my Jeep?
Please see our SPIDERWEBSHADE collection in order to determine which product would work best with your Jeep.
Do I need to remove my SPIDERWEBSHADE in order to put my factory hardtop or soft-top back up again?
No. The SPIDERWEBSHADE is designed to be left on at all times. Once installed, it will not interfere with your Jeep’s factory tops and they can be put up on top of the SPIDERWEBSHADE.
I purchased a JK series SPIDERWEBSHADE with the additional grommets for the Freedom hard top. However, the hard top grommets do not seem to line up with the holes on my Jeep. How can I fix this?
If you are facing this problem or a similar problem there is a simple solution. In order to get the grommets to line up, just release pressure in the shade by unfastening some of the SpiderBalls in the front and rear of your Jeep. This should allow you to position the Shade so that the Freedom top bolts can be inserted through the SPIDERWEBSHADE grommets. Then simply refasten the SpiderBalls that were unhooked in order to keep the SPIDERWEBSHADE taut.
Can I order additional SpiderBalls after my purchase?
Absolutely. Additional SpiderBalls can be purchased inexpensively on our Products page.
I have my SPIDERWEBSHADE and am ready to install, but which side is the front and which is the back?
Each SPIDERWEBSHADE model should be installed with the small patch reading SPIDERWEBSHADE.COM towards the rear of the Jeep.
Why aren’t there any installation instructions included with my order?
We do not include installation instructions with the SPIDERWEBSHADE because every Jeep is different and we believe owners should be free to configure their SPIDERWEBSHADE in any manner they see fit. However, if you would like basic instructions, you can view our installation instruction videos found on our JK4D and JKini product pages which provide useful hints and tips for all of our Shade Top products.