{"title":"Pin Anchor Shackle","description":null,"products":[{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-grape-escape-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-001","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Grape Escape Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-001","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung\/Grape Escape\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737486819633,"sku":"LBQF_FN000033-001","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-001-LBQD.png?v=1755252697"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-detonator-yellow-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-004","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Detonator Yellow Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-004","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Detonator Yellow\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737487016241,"sku":"LBQF_FN000033-004","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-004-LBQD.png?v=1755252715"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-blue-balls-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-002","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Blue Balls Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-002","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Blue Balls\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737487212849,"sku":"LBQF_FN000033-002","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-002-LBQD.png?v=1755252724"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-sublime-green-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-003","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Sublime Green Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-003","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Sublime Green\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737487442225,"sku":"LBQF_FN000033-003","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-003-LBQD.png?v=1755252732"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-pretty-pink-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-007","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Pretty Pink Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-007","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Pretty Pink\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737487835441,"sku":"LBQF_FN000033-007","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-007-LBQD.png?v=1755252741"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-black-hole-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-009","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Black Hole Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-009","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Black Hole\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737488392497,"sku":"LBQF_FN000033-009","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-009-LBQD.png?v=1755252750"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-pogo-pink-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-008","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Pogo Pink Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-008","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Pogo Pink\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737488490801,"sku":"LBQF_FN000033-008","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-008-LBQD.png?v=1755252759"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-obscene-orange-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-005","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Obscene Orange Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-005","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Obscene Orange\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737488589105,"sku":"LBQF_FN000033-005","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-005-LBQD.png?v=1755252767"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-flame-red-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-006","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Flame Red Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-006","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Flame Red\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737488687409,"sku":"LBQF_FN000033-006","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-006-LBQD.png?v=1755252776"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-gun-gray-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-010","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Gun Gray Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-010","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Gun Gray\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737488818481,"sku":"LBQF_FN000033-010","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-010-LBQD.png?v=1755252786"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-pure-white-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-011","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Pure White Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-011","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Pure White\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737488916785,"sku":"LBQF_FN000033-011","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-011-LBQD.png?v=1755252795"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-nice-gal-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-012","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Nice Gal Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-012","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Nice Gal\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737488982321,"sku":"LBQF_FN000033-012","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-012-LBQD.png?v=1755252802"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-brass-knuckle-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-013","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Brass Knuckle Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-013","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Brass Knuckle\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489080625,"sku":"LBQF_FN000033-013","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-013-LBQD.png?v=1755252809"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-blue-balls-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-002","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Blue Balls Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-002","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Blue Balls\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489146161,"sku":"LBQF_FN000034-002","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-002-LBQD.png?v=1755252816"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-black-lung-raw-dog-moose-knuckle-offroad-moose-knuckle-offroad-fn000033-014","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Black Lung \/ Raw Dog Moose Knuckle Offroad - Moose Knuckle Offroad - FN000033-014","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Black Lung\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Black Lung \/ Raw Dog\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black Lung\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489244465,"sku":"LBQF_FN000033-014","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000033-014-LBQD.png?v=1755252823"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-grape-escape-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-001","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Grape Escape Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-001","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic\/Grape Escape\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489310001,"sku":"LBQF_FN000034-001","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-001-LBQD.png?v=1755252831"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-detonator-yellow-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-004","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Detonator Yellow Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-004","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Detonator Yellow\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489375537,"sku":"LBQF_FN000034-004","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-004-LBQD.png?v=1755252838"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-sublime-green-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-003","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Sublime Green Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-003","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Sublime Green\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489473841,"sku":"LBQF_FN000034-003","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-003-LBQD.png?v=1755252846"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-flame-red-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-006","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Flame Red Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-006","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Flame Red\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489539377,"sku":"LBQF_FN000034-006","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-006-LBQD.png?v=1755252853"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-obscene-orange-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-005","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Obscene Orange Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-005","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Detonator Yellow\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489670449,"sku":"LBQF_FN000034-005","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-005-LBQD.png?v=1755252863"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-grape-escape-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-001","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Grape Escape Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-001","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum\/Grape Escape\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489735985,"sku":"LBQF_FN000035-001","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-001-LBQD.png?v=1755252870"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-nice-gal-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-012","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Nice Gal Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-012","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Nice Gal\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489801521,"sku":"LBQF_FN000034-012","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-012-LBQD.png?v=1755252877"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-black-hole-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-009","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Black Hole Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-009","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Black Hole\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737489932593,"sku":"LBQF_FN000034-009","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-009-LBQD.png?v=1755252886"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-pretty-pink-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-007","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Pretty Pink Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-007","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Pretty Pink\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490096433,"sku":"LBQF_FN000034-007","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-007-LBQD.png?v=1755252895"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-pure-white-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-011","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Pure White Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-011","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Pure White\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490194737,"sku":"LBQF_FN000034-011","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-011-LBQD.png?v=1755252902"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-raw-dog-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-014","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Raw Dog Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-014","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Raw Dog\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490260273,"sku":"LBQF_FN000034-014","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-014-LBQD.png?v=1755252910"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-brass-knuckle-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-013","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Brass Knuckle Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-013","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Brass Knuckle\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490325809,"sku":"LBQF_FN000034-013","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-013-LBQD.png?v=1755252916"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-gun-gray-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-010","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Gun Gray Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-010","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Gun Gray\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490391345,"sku":"LBQF_FN000034-010","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-010-LBQD.png?v=1755252925"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-atomic-silver-pogo-pink-moose-knuckle-offroad-moose-knuckle-offroad-fn000034-008","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Atomic Silver \/ Pogo Pink Moose Knuckle Offroad - Moose Knuckle Offroad - FN000034-008","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Atomic Silver\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Atomic Silver \/ Pogo Pink\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Atomic Silver\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490489649,"sku":"LBQF_FN000034-008","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000034-008-LBQD.png?v=1755252933"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-blue-balls-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-002","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Blue Balls Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-002","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Blue Balls\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490555185,"sku":"LBQF_FN000035-002","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-002-LBQD.png?v=1755252941"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-sublime-green-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-003","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Sublime Green Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-003","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Sublime Green\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490620721,"sku":"LBQF_FN000035-003","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-003-LBQD.png?v=1755252948"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-detonator-yellow-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-004","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Detonator Yellow Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-004","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Detonator Yellow\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490686257,"sku":"LBQF_FN000035-004","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-004-LBQD.png?v=1755252956"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-obscene-orange-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-005","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Obscene Orange Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-005","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Obscene Orange\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490751793,"sku":"LBQF_FN000035-005","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-005-LBQD.png?v=1755252966"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-pretty-pink-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-007","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Pretty Pink Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-007","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Pretty Pink\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490817329,"sku":"LBQF_FN000035-007","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-007-LBQD.png?v=1755252975"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-flame-red-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-006","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Flame Red Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-006","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Flame Red\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490882865,"sku":"LBQF_FN000035-006","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-006-LBQD.png?v=1755252985"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-pogo-pink-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-008","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Pogo Pink Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-008","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Pogo Pink\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737490948401,"sku":"LBQF_FN000035-008","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-008-LBQD.png?v=1755252992"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-pure-white-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-011","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Pure White Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-011","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Pure White\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737491276081,"sku":"LBQF_FN000035-011","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-011-LBQD.png?v=1755252999"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-gun-gray-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-010","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Gun Gray Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-010","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Gun Gray\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737491505457,"sku":"LBQF_FN000035-010","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-010-LBQD.png?v=1755253006"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-black-hole-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-009","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Black Hole Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-009","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Black Hole\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737491702065,"sku":"LBQF_FN000035-009","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-009-LBQD.png?v=1755253014"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-brass-knuckle-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-013","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Brass Knuckle Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-013","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Brass Knuckle\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737491767601,"sku":"LBQF_FN000035-013","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-013-LBQD.png?v=1755253021"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-nice-gal-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-012","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Nice Gal Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-012","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Nice Gal\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737491865905,"sku":"LBQF_FN000035-012","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-012-LBQD.png?v=1755253028"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-blue-pill-detonator-yellow-moose-knuckle-offroad-moose-knuckle-offroad-fn000036-004","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Blue Pill \/ Detonator Yellow Moose Knuckle Offroad - Moose Knuckle Offroad - FN000036-004","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Blue Pill\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Blue Pill \/ Detonator Yellow\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Blue Pill\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737491964209,"sku":"LBQF_FN000036-004","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000036-004-LBQD.png?v=1755253036"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-blue-pill-blue-balls-moose-knuckle-offroad-moose-knuckle-offroad-fn000036-002","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Blue Pill \/ Blue Balls Moose Knuckle Offroad - Moose Knuckle Offroad - FN000036-002","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Blue Pill\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Blue Pill \/ Blue Balls\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Blue Pill\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737492029745,"sku":"LBQF_FN000036-002","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000036-002-LBQD.png?v=1755253044"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-blue-pill-grape-escape-moose-knuckle-offroad-moose-knuckle-offroad-fn000036-001","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Blue Pill \/ Grape Escape Moose Knuckle Offroad - Moose Knuckle Offroad - FN000036-001","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Blue Pill\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Blue Pill\/Grape Escape\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Blue Pill\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737492095281,"sku":"LBQF_FN000036-001","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000036-001-LBQD.png?v=1755253052"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-red-rum-raw-dog-moose-knuckle-offroad-moose-knuckle-offroad-fn000035-014","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Red Rum \/ Raw Dog Moose Knuckle Offroad - Moose Knuckle Offroad - FN000035-014","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Red Rum\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Red Rum \/ Raw Dog\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Red Rum\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737492193585,"sku":"LBQF_FN000035-014","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000035-014-LBQD.png?v=1755253060"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-blue-pill-sublime-green-moose-knuckle-offroad-moose-knuckle-offroad-fn000036-003","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Blue Pill \/ Sublime Green Moose Knuckle Offroad - Moose Knuckle Offroad - FN000036-003","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Blue Pill\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Blue Pill \/ Sublime Green\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Blue Pill\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737492291889,"sku":"LBQF_FN000036-003","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000036-003-LBQD.png?v=1755253067"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-blue-pill-flame-red-moose-knuckle-offroad-moose-knuckle-offroad-fn000036-006","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Blue Pill \/ Flame Red Moose Knuckle Offroad - Moose Knuckle Offroad - FN000036-006","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Blue Pill\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Blue Pill \/ Flame Red\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Blue Pill\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737492357425,"sku":"LBQF_FN000036-006","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000036-006-LBQD.png?v=1755253075"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-blue-pill-pogo-pink-moose-knuckle-offroad-moose-knuckle-offroad-fn000036-008","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Blue Pill \/ Pogo Pink Moose Knuckle Offroad - Moose Knuckle Offroad - FN000036-008","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Blue Pill\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Blue Pill \/ Pogo Pink\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Blue Pill\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737492422961,"sku":"LBQF_FN000036-008","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000036-008-LBQD.png?v=1755253085"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-blue-pill-obscene-orange-moose-knuckle-offroad-moose-knuckle-offroad-fn000036-005","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Blue Pill \/ Obscene Orange Moose Knuckle Offroad - Moose Knuckle Offroad - FN000036-005","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Blue Pill\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Blue Pill \/ Obscene Orange\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Blue Pill\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737492488497,"sku":"LBQF_FN000036-005","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000036-005-LBQD.png?v=1755253093"},{"product_id":"boh-3-4-spin-pin-shackle-and-mohawk-2-0-receiver-combo-blue-pill-pretty-pink-moose-knuckle-offroad-moose-knuckle-offroad-fn000036-007","title":"B'oh 3\/4 Spin Pin Shackle and Mohawk 2.0 Receiver Combo Blue Pill \/ Pretty Pink Moose Knuckle Offroad - Moose Knuckle Offroad - FN000036-007","description":"\u003cp\u003eB'oh Two Finger Spin Pin 3\/4 Anchor Shackle. A twist (pun intented) on a standard D-ring bow recovery shackle our new B'oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins!\u003c\/p\u003e\u003cp\u003eWe collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body.\u003c\/p\u003e\u003cp\u003eThis allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle.\u003c\/p\u003e\u003cp\u003eWhere a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard.\u003c\/p\u003e\u003cp\u003eThe lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail.\u003c\/p\u003e\u003cp\u003eUnlike a traditional lifting shackles we beef up this 3\/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries.\u003c\/p\u003e\u003cp\u003eAll inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear.\u003c\/p\u003e\u003cp\u003eThe Moose Knuckle Offroad B'oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7\/8 inch (0.875 inch) pin hole and a mount width of 1-1\/4 inch (1.25 inch) or less.\u003c\/p\u003e\u003cp\u003eMohawk Receiver 2.0 - Blue Pill\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength of your connection point providing a work load limit of 10,000lbs.\u003c\/p\u003e\u003cp\u003eTwo hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3\/4 inch shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I\/II hitch ball.\u003c\/p\u003e\u003cp\u003eMost shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends.\u003c\/p\u003e\u003cp\u003eThe Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up.\u003c\/p\u003e\u003cp\u003eThe spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShackle Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eItem: 3\/4 Screw Pin Anchor Shackle\u003c\/li\u003e\n\u003cli\u003eColor: Blue Pill \/ Pretty Pink\u003c\/li\u003e\n\u003cli\u003ePin Style: Screw\u003c\/li\u003e\n\u003cli\u003ePin Feature: Two Finger Spin Pin Ring Lanyard\u003c\/li\u003e\n\u003cli\u003eWLL: 10,000 lb.\u003c\/li\u003e\n\u003cli\u003eFoS (Factor of Safety): 5:1\u003c\/li\u003e\n\u003cli\u003eWidth Between Eyes: 1-1\/4 inch (1.25 inch)\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated\u003c\/li\u003e\n\u003cli\u003ePin Diameter: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003eThread Size: M22 x 2.5mm - 6H\/6g\u003c\/li\u003e\n\u003cli\u003ePin Material: Carbon Steel\u003c\/li\u003e\n\u003cli\u003eBody Material: Carbon Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Raw Dog uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing.\u003c\/p\u003e\u003cp\u003eOnly the Jowl hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this option will show signs of weathering and rust if left uncoated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReceiver Specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Blue Pill\u003c\/li\u003e\n\u003cli\u003eMaterial: Warm Forged 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eReceiver Size: 2.0 inch\u003c\/li\u003e\n\u003cli\u003eShackle Size: 3\/4 inch shackles with 7\/8 inch pin diameter\u003c\/li\u003e\n\u003cli\u003eCoating: UV and Weather Proof Anodized Green w\/ Laser Etched Logos\u003c\/li\u003e\n\u003cli\u003eWLL (Work Load Limit): 5t or 10,000lbs\u003c\/li\u003e\n\u003cli\u003eG.T.W. (Gross Trailer Weight): 3,500lbs\u003c\/li\u003e\n\u003cli\u003eT.W. (Tongue Weight): 300lbs\u003c\/li\u003e\n\u003cli\u003eBall Hitch Size: Spacer included to accept Class I \/ II hitch balls with 3\/4 inch shank dia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Moose Knuckle Offroad","offers":[{"title":"Default Title","offer_id":51737492554033,"sku":"LBQF_FN000036-007","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/0522\/6545\/files\/FN000036-007-LBQD.png?v=1755253101"}],"url":"https:\/\/thejeephut.com\/collections\/pin-anchor-shackle.oembed","provider":"JeepHut Offroad","version":"1.0","type":"link"}