Product 14/23

Previous
Return to the Product List
Next

2007 - 2012 Jeep JK Wrangler 4-Door 4" X-series Suspension by Rough Country

$1,199.95


Add to Cart:
Kit Contents:
Front: Lifted coil springs, upper and lower adjustable control arms with X-Flex joints, adjustable track bar, quick disconnects, and stainless steel brake lines.

Rear: Lifted coils springs, coil correction plates, upper and lower adjustable control arms with X-Flex joints, track bar drop bracket, sway bar links, and stainless steel brake lines.

Shocks: Features (4) Performance 2.2 series shocks.
Notes:
• 2012 models require exhaust modification to clear front driveshaft.
Benefits:
• 100% bolt-on installation.
• Increased ground clearance.
• Coil correction plates corrects the rear coil angle 10 degrees.
• Coil correction plates allows the rear coil springs to function more effeciently.
• Application valved Performance 2.2 series shocks.
• Unique coil springs for 4-door & 2-door models.
• Features our NEW X-Flex control arms:
  • • Massive flex joints with 2.5" diameter body and huge 1.25" threads
  • • Adjustable from stock to 6" of lift
  • • All joints are fully rebuildable
  • • Fully greasable
  • • Adjustable retainer ring
  • • Upper joints pivot up to 20 degrees
  • • Lower joints pivot up to 35 degrees
  • • Lower control arms are made of Heavy Duty tubing
Specs:
• Part #: 673X (2door)
• Part #: 674X (4door)
• Install Time: 4 - 5 hours
• Wheel Backspacing: 4.5" - 4.75"
• Recommended Tire Size: 35x12.50
• Download Instructions: View

Rough Country:

  • Recommended parts: Performance steering stablizer 87319, Performance dual steering satabilizer 87349
  • Upgrades & Accessories: OEM steering stabilizer 84318


Kit Notes

On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.

  • Model: 674X
  • Manufactured by: Rough Country